FAST DELIVERY
MOTUL Scooter Expert LE MB 10W-40 4T 1l engine oil
100% ORIGINAL AND QUALITY
24 MONTHS GUARANTEE
- Description
- Properties
MOTUL Scooter Expert LE MB 10W-40 4T 1l engine oil
Specifically designed for scooters and maxi-scooters fitted with 4 stroke engines, any engine displacement, with or without catalytic converters, without wet clutch.All scooters used for daily commuting and urban riding.Suitable for all type of gasoline fuels, leaded or unleaded, with or without Ethanol, biofuels.
Packaging: 1 l
Features & benefits:
STANDARDS
API SM / SL / SJ / SH / SG JASO MB under N°M033MOT137
Technosynthese® engine oil, reinforced with synthetic base stocks which provide outstanding protection and oil film resistance. Excellent high temperature resistance particularly indicated for city use: full load during long periods and stop and go use with difficult cooling.
JASO MB lubricant ensures optimal scooter performance and fuel economy. Compared to a JASO MA lubricant, JASO MB lubricant provides real energy saving performance, up to 2.5% gains in fuel consumption compared to a 20W-50 JASO MA lubricant and up to 2% savings compared to a 10W-40 JASO MA oil, in urban/city conditions and start & stop driving mode. By reducing fuel consumption, this JASO MB lubricant contributes to reducing greenhouse gases relative to CO2 emissions and allows reduction of polluting emissions (Low Emissions).
The SAE 10W-40 viscosity grade corresponds to the most recent manufacturers’ recommendations.
Low volatility for reduced oil consumption.
Ensures engine cleanliness, detergent and dispersive properties, and resistance to viscosity increase from unburned deposits produced by the engine. Ageing resistance.
Anti-oxidation, Anti-corrosion, Anti-foam properties
Viscosity grade | SAE J 300 | 10W-40 |
Density at 20°C (68°F) | ASTM D1298 | 0.864 |
Viscosity at 40°C (104°F) | ASTM D445 | 102.1 mm²/s |
Viscosity at 100°C (212°F) | ASTM D445 | 14.6 mm²/s |
Viscosity Index | ASTM D2270 | 150.0 |
TBN | ASTM D2896 | 7.1 mg KOH/g |
Pour point | ASTM D97 | -35.0 °C / -31.0 °F |
Flash point | ASTM D92 | 232.0 °C / 449.6 °F |