Battery charger TECMATE OptiMate Pro-4 DUO

Battery charger TECMATE OptiMate Pro-4 DUO

Product code: TM-670

Overview

OptiMate PRO-4 DUO is the automatic diagnostic charger for 4 x 12V Pb lead-acid (STD, AGM, GEL) and/or 12.8V LFP lithium (LiFePO4 / Lithium Ferrous Phosphate) batteries.

Four fully independent 5 Amp charging stations / banks, each with 3 Selectable modes to service NEW and USED powersport batteries, including 12V Pb (lead-acid, AGM, GEL) and 12.8V lithium (LiFePO4 / LFP) – activate 4x NEW, or save and/or charge and test 4x USED batteries!

Activate or prepare new batteries within one hour (60’), including Pb (lead-acid, dry-charged AGM) with separate acid pack, factory activated Pb (AGM & GEL) and LFP lithium delivered in sleep mode and/or requiring a top up charge – correctly prepares new batteries for best performance and to prevent early failure.

Automatically save any type of deep discharged battery from as low as 0.5 Volts, additionally for LFP lithium, manually reset the protective BMS and save from zero volts – dead-flat, neglected batteries can be recovered!

State of health test for GOOD (80 to 100%), OK (60 – 80%) or BAD (below 60%) batteries – confirms if battery is Serviceable or should be replaced.

Designed for the global professional, including battery service, new powersport vehicle and/or new battery sales – service orientated product designed for continuous use.
test light indication on optimate pro 4 duo

Each bank delivered with a replaceable output cord and fused battery clip set, AC power cord is replaceable / exchangeable – premium cables, internationally available.

For all 12V power sport battery types including lead-acid (Pb) > STD (with filler caps), AGM & GEL (sealed VRLA) and Li-Ion made with LiFePO4 / LFP technology.

Specifications

IDEAL FOR:

• 12V lead-acid (STD / AGM / GEL) batteries
• 12.8V / 13.2V LiFePO4 batteries
• NEW Pb & LFP batteries without BMS

CHARGING AMPS: 0.2A to 5A variable (Ampmatic)

CHARGING VOLTS: 12V lead-acid: 0.5V to 14.4V. 12.8V/13.2V Lithium LFP (LiFePO4): 0.5V to 14.4V. 60': 11.4V to 14.4V.

OPERATION: Selectable

• Pb: for 12V lead-acid (STD / AGM / GEL) batteries.
• LFP: for 12.8V / 13.2V LiFePO4 batteries.
• 60': A shortened program with charge time limited to 60 minutes or 1 hour, suitable for first charge / activation of a new battery, or a quick recharge of a healthy used battery with voltage higher than 11.4V. NOTE: If no selection (Pb or LFP) is made prior to connecting a battery for charge, the 60' mode becomes the default selection.

Steps: 11

USE: Indoor rating IP40.

INPUT: Global (100-240V 50-60Hz), high efficiency.

STYLE: AC Class 2 input socket, with ON/OFF switch, 15cm / 6" output cord.

INCLUDED CABLES: Class II AC cord suitable for region, O-43 charge lead extender 180cm/72" and O-14 fused battery clips.